Our recommendations are made independently. We may receive commissions from purchases made via our links.

Moen GXS75C Host Series 3/4 HP vs InSinkErator Evolution Compact 3/4 HP Garbage Disposal Side-by-Side Comparison

By , , and ·Updated
Moen GXS75C Host Series 3/4 HP vs InSinkErator Evolution Compact 3/4 HP Garbage Disposal

Overall Verdict

Deciding between the Moen GXS75C Host Series 3/4 HP and the InSinkErator Evolution Compact 3/4 HP because they both offer excellent values. On one hand, the Moen Host GXS75C scores higher in terms of grinding capabilities and power efficiency; on the other hand, InSinkErator Evolution Compact is one of the smoothest models on the market while being not so bad a grinder itself.

To be more specific, according to the results from performance testing, the Evolution Compact ranks 6th out of 20 different units. Even though the disposal isn’t in the top 5, delivering consistently quality output tests after tests while showing us the effectiveness of its noise/vibration damping feature definitely earned a recommendation from us. Aside from that, the in-sink grinder is beloved among enthusiasts for its quality and long-lasting build.

The Moen GXS75C Host was a surprise because we didn’t expect it to yield such impressive results. To give you some idea of how good the disposal is, not only is it the better-performing grinder in this matchup, it also outperformed its 1-horsepower sibling—the GX100C. In terms of noise, however, the Moen GXS75C’s soundproofing feature can’t compete with that of the Evolution Compact.

Choosing between the two disposals ultimately comes down to whether or not you value a quiet kitchen. The Moen GXS75C Host Series 3/4 HP, despite being a little loud against certain foods, is a highly-capable garbage disposal with quality control from a reputable brand. The InSinkErator Evolution Compact may be a little less aggressive but is noticeably quieter in comparison.

Ranking by
Showing: 2/2 Items

Pros & Cons

  • Noise reduction
  • High speed 
  • Stainless steel grinding components
  • Space-saving design
  • Rinse-assist splash guard
  • Noise cancelation
  • Vibration damping
  • High-torque motor
  • Strengthened chamber layout
  • High capacity
  • Stainless steel grinding components
  • Can be loud
  • Basic chamber layout
  • Heavy
  • Space-consuming
  • No power cord

Key Specs

Type of feed
Continuous
Continuous
Horsepower
3/4
3/4
Motor type
Permanent magnet
Induction
Averaged RPM
4956
1482
Family size
3-4 people
3-4 people
Dimensions
L5.4 x W7.3 x H13.4 inches
L6.1 x W8.6 x 12.4 inches

Where to Buy

Price at publication
$124.38
$203.01

*You help support Shouldit's product testing and reviews by purchasing from our retail partners.


Analysis and Test Results

Performance

Overall Performance Scoring
7.4
6.9

Scrap Mix

8.0
6.9
Moen Host Series GXS75C 3/4-HP Scrap Mix Test
8.61 ounces of visible fish pin bones in mess of ground assorted scraps, on digital scale, on granite-looking top.
11.96 ounces of ground assorted scraps, including dietary fibers, bones, etc., on digital scale, on granite-looking top.
0.09 ounces of shredded pieces of fish backbone, dietary fibers, and fish meat, on digital scale, on granite-looking top.
 InSinkErator Evolution Compact 3/4 HP Scrap Mix Test
11.03 ounces of fish pin bones in mess of assorted scraps from garbage disposal on digital scale on granite-looking top
20.52 ounces of ground products from garbage disposal, displayed on digital scale, placed on granite-looking table. Mess of assorted scraps, including fibers, bones, etc.
0.06 ounces of ground products from garbage disposal, displayed on digital scale, placed on granite-looking table. Shredded fish vertebrae and pieces of dietary fiber.
Input Load
90.0 oz (2551 g)
90.0 oz (2551 g)
Time
2 min
1 min 49 sec
Layer 1
8.6 oz (244 g)
11.0 oz (313 g)
Layer 2
12.0 oz (339 g)
20.5 oz (582 g)
Leftovers
0.1 oz (3 g)
0.1 oz (2 g)

Raw Fish Scraps

6.0
7.3
Moen Host Series GXS75C 3/4-HP Raw Fish Scraps Test
7.2 ounces of visible pin bones among mess of raw fibrous tissue from fish scraps, on digital scale, on granite-looking top.
2.63 ounces of shredded bones and fibrous tissue from fish scraps, on digital scale, placed on granite-looking top.
3 ounces of fish vertebrae among mess of shredded fish skin, on digital scale, on granite-looking top.
InSinkErator Evolution Compact 3/4 HP Raw Fish Scraps Test
5.56 ounces of ground fish scraps from garbage disposal, displayed on digital scale, placed on granite-looking table. Few pin bones among a mess of raw fibrous tissue.
3.53 ounces of ground fish scraps from garbage disposal, displayed on digital scale, placed on granite-looking table. Mess of assorted shredded bones and raw fibrous tissue.
2.02 ounces of ground fish scraps from a garbage disposal, displayed on digital scale, placed on granite-looking table. Mess of shredded fish backbone and skin.
Input Load
49.4 oz (1400 g)
49.4 oz (1400 g)
Time
3 min
3 min
Layer 1
7.2 oz (204 g)
5.6 oz (158 g)
Layer 2
2.6 oz (75 g)
3.5 oz (100 g)
Leftovers
3.0 oz (85 g)
2.0 oz (57 g)

Raw Chicken Scraps

7.6
6.6
Moen Host Series GXS75C 3/4-HP Raw Chicken Scraps Test
0.84 ounces of fibrous soft tissue and few pieces of shredded chicken bones, on digital scale, on granite-looking top.
1.59 ounces of shredded soft tissue and pieces of shredded chicken bones, on digital scale, on granite-looking top.
0.14 ounces of shredded soft stringy tissue and cartilage from chicken scraps, on digital scale, on granite-looking top.
InSinkErator Evolution Compact 3/4 HP Raw Chicken Scraps Test
1.45 ounces of ground chicken scraps from garbage disposal, displayed on digital scale, placed on granite-looking table. Mess of shredded soft tissue and few pieces of shredded bones.
1.63 ounces of ground chicken scraps from garbage disposal, displayed on digital scale, placed on granite-looking table. Mess of shredded tendons and pieces of shredded bones.
0.37 ounces of ground chicken scraps from a garbage disposal, displayed on digital scale, placed on granite-looking table. Mess of soft tissue and pieces of shredded cartilage.
Input Load
7.4 oz (210 g)
7.4 oz (210 g)
Time
3 min
2 min 30 sec
Layer 1
0.8 oz (24 g)
1.4 oz (41 g)
Layer 2
1.6 oz (45 g)
1.6 oz (46 g)
Leftovers
0.1 oz (4 g)
0.4 oz (10 g)

Design

Overall Design Scoring
8.8
8.9

In the Box

Corded Moen GXS75C with 3-Bolt Mount, box, register slip, user manual, stopper, elbow tube, rubber gasket, flange, and bolts.
InSinkErator Evolution Compact 3/4 HP with 3-Bolt Mount assembly on top, next to its box, user manual, registration slip, sink stopper, hose clamp, elbow tube, straight tube, wrench, and bolts.

Dimensions

Moen GXS75C with mount assembly and elbow tube. Showing 7.4-inch width, 13.4-inch height, 4.1-inch depth to dishwasher outlet, 6.9-inch depth to outlet, 5.4-inch distance to elbow tube.
InSinkErator Evolution Compact 3/4-hp food disposer with mount assembly and elbow tube. Dimensions show 8.6-inch width, 12.4-inch height, 3.4-inch depth to dishwasher outlet, 6.6-inch depth to outlet, 6.1-inch distance to elbow tube.
Length
5.4" (13.7 cm)
6.1" (15.5 cm)
Width
7.3" (18.5 cm)
8.6" (21.8 cm)
Height
13.4" (34.0 cm)
12.4" (31.5 cm)
Weight
9.8 lbs (4.4 kg)
16.0 lbs (7.3 kg)

Mount Assembly

3-Bolt Mount assembly for Moen garbage disposals placed on white platform with stopper in position.
3-Bolt Mount assembly for Moen garbage disposals placed on white platform with stopper in position.
Backup flange, mounting ring, snap ring, gasket, stopper, cushion mount, sink flange, splash guard, lower mounting ring.
3-Bolt Mount assembly for garbage disposals placed on white platform. “food waste disposer” and “InSinkErator” engraving on rim of sink flange. Sink stopper in position.
3-Bolt Mount assembly for garbage disposals placed on white platform. “food waste disposer” and “InSinkErator” engraving on rim of sink flange. Sink stopper in position.
Parts of 3-Bolts Mount assembly on platform, including backup flange, mounting ring, snap ring, fiber gasket, stopper, cushion mount, sink flange with “food waste disposer” and “InSinkErator” engravings, removable sink baffle, lower mounting ring.

Grind Chamber

7.0
8.5
Top view into chamber of Moen Host Series GXS75C garbage disposal after testing, looking at layout of grinding components.
Top view into chamber of Moen Host Series GXS75C garbage disposal after testing, looking at layout of grinding components.
Inside view of Moen Host Series GXS75C garbage disposal, showing design of grater ring and details on flywheel.
Inside view of Moen Host Series GXS75C food disposer, showing design of impellers and details of flywheel and grater ring.
Top view through collar of InSinkErator Compact 3/4-hp garbage disposal into chamber after testing. Looking at layout of grinding components, showing swivel impellers, flywheel, and grater/grinder ring.
Top view through collar of InSinkErator Compact 3/4-hp garbage disposal into chamber after testing. Looking at layout of grinding components, showing swivel impellers, flywheel, and grater/grinder ring.
Inside view of Evolution Compact 3/4-hp garbage disposal, highlighting design of GrindShear grater ring by InSinkErator, partially showing details of flywheel.
Inside view of InSinkErator Evolution Compact 3/4-hp garbage disposal after testing, highlighting design of impellers, partially showing details of flywheel and grater/grinder ring.
Capacity
30.0 fl oz (887.2 ml)
32.0 fl oz (946.4 ml)
Verticality
6.4" (16.3 cm)
5.4" (13.7 cm)
Flywheel
4.4" (11.1 cm)
5.3" (13.3 cm)
Assembly Material
Basic
Stainless steel
Layout
Galvanized steel
Strengthened

Motor

9.5
8.0
Horsepower
3/4
3/4
Speed
2700 RPM
1725 RPM
Real Speed
4956 RPM
1482 RPM
Voltage
115 V (60 Hz)
120 V (60 Hz)
Current
4.5 A
8.1 A
Wattage
518 W
972 W
Heat
N/a
N/A
Reverse
No
No

Power Cord

Bottom view of Moen Host Series GXS75C 3/4 HP corded garbage disposal with type-B power cord.
Bottom view of InSinkErator Evolution Compact 3/4-hp with two pre-cut electrical wires and no power cord. (Unscrewed) cover plate and screw to the sides.
Length
2.8 ft (0.9 m)
NaN" (NaN cm)
Type
3-prong (Type B)
 n/a

Accessories

Standard outlet/discharge set for garbage disposals on white top, showing elbow pipe, rubber gasket, flange, and bolts.
Hose clamp and elbow discharge/outlet tube for garbage disposals displayed on granite-looking top.
Width
3.3" (8.3 cm)
3.3" (8.3 cm)
Length
5.3" (13.3 cm)
5.3" (13.3 cm)
Material
PVC
PVC

Build Quality

9.5
10
Moen Host Series 3/4-HP Garbage Disposal, with 3-Bolt Mount assembly on top and outlet/discharge set in place.
InSinkErator Evolution Compact 3/4 HP Continuous Feed Garbage Disposal, with 3-Bolt Mount assembly on top and outlet/discharge set installed.
Noise Reduction
Yes
Yes
Vibration Reduction
No
Yes

Usability

Overall Usability Scoring
8.6
8.2

Ease of Use

9.0
9.0

Installation

9.0
6.0

Smooth Operation

9.0
10

Unjam Mechanics

0.0
5.0
Inside view of permanent-magnet garbage disposal showing manual unjam method with wooden stick in flywheel’s opening/gap.
Bottom view of InSinkErator Evolution Compact disposal, showing jam buster wrench in manual unjam slot.
External
No
Yes
Auto Unjam
No
No